ISO 9001 certified plastic CNC machining: custom parts from high-performance engineering plastics including PEEK, PEI (Ultem), POM (Delrin), nylon, PPS, PSU, PAI, UHMWPE and PC. We machine gears, bearings, bushings, insulators, guide rails, manifolds and wear components to tight tolerances, using sharp tooling, annealed stock and stable clamping to prevent warping. ±0.01 mm where the design allows, DDP shipping to the USA, Germany, France, Italy and across Europe — quote in 24 hours.
When a metal part is too heavy, too conductive or cannot survive the chemical or thermal environment, engineers turn to high-performance polymers. We machine them with stress-relieved stock and controlled cuts to hold tight dimensions without warping.
High-strength, chemical-resistant PEEK for medical, semiconductor, aerospace and industrial parts that must work continuously at elevated temperatures and be sterilised.
Amber PEI/Ultem with excellent electrical insulation, flame and smoke performance for test sockets, fixtures and electronics components.
Low-friction, dimensionally stable acetal for gears, bearings, rollers, spacers and quiet sliding components at the best value.
Tough nylon and ultra-high-molecular-weight polyethylene for wear strips, guides, rollers, pulleys and impact-resistant components.
Annealed stock, sharp tooling, correct coolant and balanced clamping hold tight tolerances and prevent movement after machining.
Certified polymer stock, protective packaging and worldwide DHL/FedEx/UPS, air or sea freight. DDP to the EU clears customs and duty, door-to-door.
We stock certified engineering plastics in natural and filled grades, selecting each polymer to match temperature, load, electrical and chemical requirements.
High-temperature, high-strength, chemical-resistant and sterilizable for medical, semiconductor, aerospace and demanding industrial parts.
Amber transparent polyetherimide with excellent electrical insulation and flame/smoke performance for insulators, sockets and fixtures.
The workhorse for mechanical parts — gears, bearings, bushings, rollers and sliding components with low friction and tight dimensions.
Tough, wear-resistant nylon for gears, rollers, wheels, spacers and structural components; also oil-filled and cast nylon.
High-temperature, chemically resistant polymers and Torlon for demanding bearing, insulating and structural applications.
Low-friction, impact- and abrasion-resistant wear strips, guides, rails and food-grade contact plates.
Polycarbonate for transparent guards and insulators, PTFE and PVDF for chemical and high-purity service.
Glass- or carbon-fibre-reinforced PEEK, POM, nylon and PA for higher strength, stiffness and dimensional stability.
Every component is made-to-print / OEM. A selection of representative machined polymer parts.
Need a different grade, thread, finish or volume? Send STEP, STP, IGS, DWG or PDF for a quotation within 24 hours.
We use machining, deburring and stress-relief processes to protect dimensions, appearance and the function of polymer components.
Standard fine-machined finish with controlled feed marks, sharp edges removed and complete deburring on every part.
Defined Ra values with sharp tooling and fine feeds for smooth bearing, sealing and sliding surfaces.
Vapor polishing for clear polycarbonate parts to improve optical clarity and seal transparent components.
Fine bead blasting for a uniform matte surface, to reduce machining marks and improve appearance.
Annealing before and after machining relieves internal stress to prevent warping and stabilise dimensions.
Mechanical and manual edge breaking and deburring to remove burrs and produce safe, clean polymer parts.
| Parameter | Capability |
|---|---|
| Processes | CNC milling, CNC turning, turn-mill with live tooling, drilling, tapping, boring, grooving |
| Materials | PEEK, PEI/Ultem, POM/Delrin, nylon PA6/PA66, PPS, PSU, PAI/Torlon, UHMWPE, HDPE, PC, PTFE, PVDF — natural and filled |
| Tolerance | ±0.01 mm on critical features where the design and polymer allow; ISO 2768-mK standard |
| Part size | From small insulators and gears to large guide rails, plates and machined polymer blocks |
| Surface finish | Ra 0.8–1.6 typical; vapor-polished PC, bead-blasted or fine-machined as specified |
| Documentation | Material certificate EN 10204 3.1, first-article inspection, CMM report, grade and batch traceability |
| Quantity | 1-off prototype · small batch · high-volume serial production; no fixed MOQ |
| Lead time | Prototype 5–10 working days; production depends on quantity, material and finish |
| Shipping | DHL/FedEx/UPS, air or sea freight; EXW, FOB or DDP to the USA, Germany, France, Italy, Spain and worldwide |
Lightweight, insulating and wear-resistant polymer components for OEMs that need chemical resistance, low friction or electrical isolation.
Sterilizable PEEK surgical components, dental guides, fixtures and instrument parts with documented material grades.
PEI and PEEK insulators, test sockets, wafer handling and electronic components with flame-rated performance.
Lightweight PEEK and PPS brackets, spacers and structural parts that resist heat and chemicals.
Food-grade UHMWPE and HDPE guides, plates, wear strips and components for processing and packaging lines.
POM, nylon and UHMWPE gears, bearings, bushings, rollers, guides and sliding components with low friction.
PEI, PC and PEEK insulators, spacers and barrier components with high dielectric strength.
Practical answers from our engineering team. Still unsure? Send your drawing and ask.
3-axis and 5-axis milling of polymer housings, blocks, plates and guides.
Turned polymer bushings, rollers, spacers and rotational parts.
Molded polymer parts with in-house mold making for higher volumes.
Complex multi-sided polymer parts machined in a single setup.
Conductive metal fittings, connectors, electrodes and busbars.
Metal brackets, enclosures, panels and assembled components.
Repeatable quality, honest DFM feedback and on-time delivery for custom precision parts.
The DFM feedback caught a tolerance problem before we cut any tooling. First samples were within spec and the lead time was exactly as quoted.
Repeatable anodised aluminium housings from batch to batch, with EN 10204 3.1 certificates included. We now release them straight to the line.
Complex 5-axis parts were quoted in under a day and shipped DDP to our door. Communication was clear at every step.
Send your drawings and requirements — our engineering team will reply within 24 hours (Mon–Sat).
