ISO 9001 certified sheet metal fabrication: precision laser cutting, CNC bending, stamping, punching, welding, grinding and finishing of enclosures, chassis, cabinets, machine housings, brackets, panels and guards in cold-rolled steel, stainless steel and aluminium. Powder coating, anodising, inserts, hardware and assembly included — DDP shipping to the USA, Germany, France, Italy and across Europe, quote in 24 hours.
From flat pattern development to a finished, powder-coated enclosure, we control the whole process in-house — laser cutting, bending, stamping, welding, grinding and coating. That means consistent fit and finish, correct bend allowances and hardware that lines up, for one-off prototypes through to repeat production.
Fibre laser cutting of steel, stainless and aluminium sheets with narrow kerfs and clean edges, nesting parts efficiently to reduce material waste and lead time.
CNC press brakes bend accurate flanges, boxes and channels using correct bend allowances and K-factors, with consistent angles and minimal distortion.
Turret punching, stamping, louvres, ventilation slots and hardware features formed in the sheet, along with countersinks and embossed features.
TIG, MIG and spot welding of frames, seams and studs, followed by grinding and finishing for smooth, clean joints ready for coating.
Iron phosphate pretreatment and RAL powder coating, plus stainless brushing and aluminium anodising, deliver a durable, cosmetic, corrosion-resistant surface.
PEM inserts, captive fasteners, hinges, latches, gaskets, fans and internal fittings installed, with assembly of complete enclosure sub-systems.
We cut, bend and weld common industrial sheet materials in standard gauges, with traceable material and protective film where needed.
General-purpose mild steel for indoor enclosures, chassis and brackets, normally powder-coated after fabrication for corrosion protection.
Zinc-coated steel sheet offering corrosion resistance with less finishing, common for support panels and internal structures.
Corrosion-resistant stainless for hygienic, outdoor, food, medical and chemical environments, with brushed or passivated finishes.
Lightweight aluminium sheet that bends and welds well, anodised or powder-coated for panels, enclosures and electronics chassis.
Galvannealed and aluminium-zinc coated sheets for improved paint adhesion and corrosion resistance in demanding environments.
Speciality sheets and thicker plate for brackets, guards and structural parts with specific strength or hardness requirements.
Decorative and conductive brass and copper sheet for busbars, shields, EMI panels and cosmetic trim.
Pre-perforated, expanded metal and mesh sheets for guards, ventilation, grilles and airflow panels.
Every component is made-to-print / OEM. A selection of representative laser-cut, bent, welded and coated enclosures and structural parts.
Need a different sheet, gauge, RAL colour or quantity? Send STEP, STP, DXF, DWG or PDF for a quotation within 24 hours.
We prepare and finish every part for a durable, cosmetic result, with masking for contact surfaces and earthing points where required.
Pretreatment followed by durable polyester or epoxy-polyester powder in any RAL colour, with matte, satin or gloss textures for indoor and outdoor use.
Iron phosphate, zinc phosphate or aluminium chromate conversion pretreatment for corrosion resistance and powder adhesion.
Clear or coloured anodising on bent aluminium parts and panels for a hard, corrosion-resistant, cosmetic surface.
Linear brushing, satin and polished finishes on stainless enclosures and panels for hygienic or cosmetic applications.
Hot-dip galvanising or zinc plating on steel brackets and structures for outdoor and corrosion-prone service.
Screen printing, labels and laser marking of logos, part numbers, CE markings and electrical legends on finished panels.
| Parameter | Capability |
|---|---|
| Processes | Fibre laser cutting, CNC press-brake bending, turret punching/stamping, TIG/MIG/spot welding, grinding, riveting, hardware insertion |
| Materials | Cold-rolled steel (SPCC), galvanised/galvannealed steel, stainless 304/316, aluminium 5052/6061/5005, brass/copper, perforated/mesh |
| Thickness | Common gauges from thin sheet (≈0.5 mm) to thicker plate; available thickness depends on material and process |
| Cutting accuracy | ≈±0.1 mm laser cutting; controlled bend angles and consistent flatness on assembled enclosures |
| Welding | TIG, MIG and spot welding with grinding and finishing of seams; leak-tight and cosmetic welds as specified |
| Fasteners | PEM/self-clinching nuts, studs and standoffs, captive screws, hinges, latches, gaskets, fans and rivets installed |
| Finishes | RAL powder coating, anodising, conversion coating, brushing, galvanising, zinc plating, screen printing and labels |
| Quantity | 1-off prototype · small batch · high-volume production; no fixed MOQ |
| Shipping | DHL/FedEx/UPS, air or sea freight; EXW, FOB or DDP to the USA, Germany, France, Italy, Spain, Australia and worldwide |
Enclosures, structures and protective fabrications for equipment builders and OEMs.
19-inch racks, server and control cabinets, electronics chassis and shielded enclosures with ventilation and earthing.
Machine housings, guards, frames, control panels and access doors for factory and automation equipment.
Hygienic stainless housings, carts and equipment panels with smooth, cleanable finishes for medical and lab use.
Stainless enclosures, brackets and washdown panels in 304/316 with corrosion-resistant and easy-to-clean surfaces.
Brackets, trays, mounts and protective panels for vehicles, test rigs, chargers and mobility systems.
Weatherproof outdoor cabinets, pole-mount boxes and ventilation enclosures with durable corrosion protection.
Practical answers from our engineering team. Still unsure? Send your drawing and ask.
Machined plates, brackets and internal precision components that fit in enclosures.
Large machined aluminium baseplates and mounting plates for equipment.
Machined aluminium heatsinks and structural parts for chassis.
Plastic bezels, panels and components that pair with metal enclosures.
Standoffs, threaded inserts and hardware used in sheet metal assembly.
Precision machined stainless components and hygienic fittings.
Send your 3D or flat-pattern drawings and requirements — our engineering team will reply within 24 hours (Mon–Sat).
