ISO 9001 certified brass CNC machining and copper CNC machining: free-cutting C36000 brass is turned into fittings, nuts, bushings, valve seats, nozzles and RF connectors, while high-conductivity copper is milled into heatsinks, busbars, terminal blocks and EDM electrodes. Turn-mill machines add cross-holes, knurls and threads in one setup. Excellent as-machined finish, ±0.01 mm on critical features, DDP shipping to the USA, Germany, France, Italy and across Europe — quote in 24 hours.
Brass and copper chip freely, allow high speeds and feeds, cause little tool wear and produce excellent surface finishes, making them unusually cost-effective for precision turned and milled parts. We select the right grade and process for fittings, conductive components and thermal parts.
Leaded free-cutting brass turns at high speed into nuts, fittings, inserts, valve seats and nozzles with a fine, consistent finish and short, non-stringy chips.
C11000 ETP and C10100 oxygen-free copper for electrical and thermal components that need maximum conductivity, connectors, contacts and terminals.
Internal and external threads, rolled or cut, plus knurling, grooving and standard/custom fittings produced to recognised thread standards.
CNC milling and drilling of copper heat sinks, cold plates and busbars for high-power electronics, power distribution, lasers and battery systems.
Copper, tellurium copper and copper-tungsten spark-erosion electrodes and contact components that stay conductive and hold fine detail.
Certified, traceable stock, protective packaging and worldwide DHL/FedEx/UPS, air or sea freight. DDP to the EU clears customs and duty, door-to-door.
We stock certified, traceable brass, copper and bronze grades, selecting free-cutting and high-conductivity alloys to match the function of each part.
The workhorse for turned fittings, nuts, connectors, valve seats and nozzles — cuts very fast and holds fine detail with an excellent finish.
Architectural bronze and naval brass for higher-strength, corrosion-resistant marine hardware, couplings and structural components.
Electrolytic tough-pitch and oxygen-free copper for premium electrical and thermal components that need maximum conductivity.
Free-machining copper that keeps high conductivity for contacts, connectors, electrode holders and precision turned components.
High-density, wear- and arc-resistant electrode alloy for EDM, welding tips and high-current contacts.
General-purpose brass for drawn and machined connectors, sleeves, terminals and decorative components.
Cast and aluminium bronzes for bearings, bushings, gears, worm wheels and heavy-load wear components.
Special alloys and customer-supplied material quoted on request — tell us the grade and we confirm feasibility.
Every component is made-to-print / OEM. A selection of representative brass and copper turned and milled parts.
Need a different grade, thread, finish or volume? Send STEP, STP, IGS, DWG or PDF for a quotation within 24 hours.
We coordinate plating and protective finishes to prevent tarnishing, improve solderability and protect sealing and contact surfaces.
Standard fine-machined finish with controlled feed marks, clean threads, complete deburring and full degreasing.
Tin for solderability and nickel for corrosion and wear protection on brass and copper parts, with masking as needed.
Silver plating on high-current contacts and connectors for the lowest contact resistance and best conductivity.
Electropolishing and chemical passivation to brighten, clean and improve the corrosion resistance of copper components.
Clear lacquer or anti-tarnish coating to preserve the bright finish and stop oxidation during storage and service.
Vibratory and centrifugal tumbling to deburr, radius edges and improve surface uniformity on high-volume parts.
| Parameter | Capability |
|---|---|
| Processes | CNC turning, Swiss-type turning, turn-mill with live tooling, CNC milling, drilling, tapping, threading, knurling, grooving |
| Materials | C36000/C3604 brass, C11000/C10100 copper, C14500 tellurium copper, naval/architectural bronze, bearing bronze, copper-tungsten — certified stock |
| Tolerance | ISO 2768-mK standard; ±0.01 mm on critical diameters, bores, threads and milled features |
| Part size | From ≈2 mm Swiss-type small parts to milled copper plates, busbars and heatsink blocks |
| Surface finish | Ra 0.8 typical on turned/machined surfaces; finer on sealing and contact surfaces; plated or lacquered as specified |
| Documentation | Mill test certificate EN 10204 3.1, first-article inspection, CMM/comparator report, material traceability |
| Quantity | 1-off prototype · small batch · high-volume serial production; no fixed MOQ |
| Lead time | Prototype 5–10 working days; production depends on quantity, material and finish |
| Shipping | DHL/FedEx/UPS, air or sea freight; EXW, FOB or DDP to the USA, Germany, France, Italy, Spain and worldwide |
Conductive, thermal and threaded precision components for OEMs that need reliable conductivity, sealing and consistent quality.
Contacts, terminals, pins, sockets, connectors and sensor components in brass, tellurium copper and copper.
Busbars, terminal blocks and lugs for switchgear, control panels, battery packs and power-electronics systems.
Valve seats, stems, fittings, nipples and manifold blocks in brass and bronze for fluid and process equipment.
RF and coaxial connectors, couplings and threaded interface components with fine surface finish.
Copper heat sinks, cold plates and heat spreaders for high-power electronics, lasers, computing and LED systems.
Naval brass and bronze fittings, couplings and hardware resistant to corrosion in marine and plumbing service.
Practical answers from our engineering team. Still unsure? Send your drawing and ask.
Swiss-type and fixed-head turning of shafts, fittings, bushings and connectors.
3-axis and 5-axis milling of housings, blocks, plates and manifolds.
Complex multi-sided parts machined in a single setup.
304/316 machined shafts, flanges, fittings and valve bodies.
PEEK, PEI, POM and nylon insulators, gears and bushings.
6061/7075 parts with anodising, sandblasting and brushing.
Repeatable quality, honest DFM feedback and on-time delivery for custom precision parts.
The DFM feedback caught a tolerance problem before we cut any tooling. First samples were within spec and the lead time was exactly as quoted.
Repeatable anodised aluminium housings from batch to batch, with EN 10204 3.1 certificates included. We now release them straight to the line.
Complex 5-axis parts were quoted in under a day and shipped DDP to our door. Communication was clear at every step.
Send your drawings and requirements — our engineering team will reply within 24 hours (Mon–Sat).
