ISO 9001 certified aluminium CNC machining: high-speed milling, turning and 5-axis machining of housings, enclosures, heatsinks, plates, robot and automotive parts in 6061, 6063, 7075, 5052 and 2024. We deliver consistent, cosmetic surfaces with clear, black, red or blue anodising, hard anodising, sandblasting, brushing and chromate conversion. Lightweight, high-accuracy parts, DDP shipping to the USA, Germany, France, Italy and across Europe — quote in 24 hours.
Aluminium cuts fast and looks excellent when the machining and finishing are done correctly. Our high-speed milling and turning control burrs, tool marks and chatter, then we finish the parts to a uniform anodised, sandblasted or brushed surface — so your visible housings and structural parts arrive ready for assembly.
Fast, efficient milling of housings, covers, pockets, fins and plates, with high metal-removal rates and clean, burr-free edges on thin-walled and lightweight parts.
CNC turning of sleeves, spacers and connectors, plus 5-axis machining of robot arms, mounts and complex multi-sided aluminium parts in one setup.
High-fin-density heatsinks, cold plates and thermal bases milled for maximum surface area and flat mounting contact in 6061 and 6063.
Clear, black, red and blue anodising, hard anodising and two-tone finishes, with sandblasting and brushing for uniform, premium cosmetic appearance.
We hold ±0.01 mm on critical bores, mating faces and hole patterns and verify dimensions on a CMM, with masking for precise anodising.
Certified aluminium, protective packaging and worldwide DHL/FedEx/UPS, air or sea freight. DDP to the EU clears customs and duty, door-to-door.
We stock certified aluminium bar, plate and block and advise on the right grade for strength, corrosion, machining and anodising.
The general-purpose workhorse: good strength, machinability, weldability and anodising for housings, plates, brackets and structural parts.
Excellent surface finish and anodising response, commonly used for frames, profiles, trims and visible cosmetic components.
High-strength aerospace alloy for robot, motorsport and high-load parts where stiffness-to-weight is critical; less corrosion resistant than 6061.
High corrosion resistance and formability for panels, enclosures and marine/chassis components with a smooth finished surface.
High-strength, fatigue-resistant aerospace alloy for structural and motorsport components, often used with protective coatings.
Cast tool-and-jig plate with exceptional inherent flatness and stability for precision fixtures, baseplates and vacuum plates.
We machine aluminium extrusions and profiles to final length and geometry, adding precision holes, pockets and end features.
5083, 6082, ADC12 die-cast and other aluminium grades, plus customer-supplied material, quoted on request.
Every component is made-to-print / OEM. A selection of representative milled, turned and anodised aluminium parts.
Need a different grade, anodising colour or higher volume? Send STEP, STP, IGS, DWG or PDF for a quotation within 24 hours.
We specialise in the cosmetic and functional finishes that aluminium parts are known for, with careful masking of precision features.
Natural silver anodising that adds corrosion resistance and a clean, uniform look without changing the colour of the part.
Deep, consistent black anodising — one of the most popular cosmetic finishes for housings, electronics, robotics and optical parts.
Coloured Type II anodising in red, blue, gold and other colours for branding, identification and two-tone cosmetic effects.
Thick, hard, wear-resistant anodising for sliding surfaces, tooling, bores and heavy-duty components, with or without colour.
Fine bead blasting before anodising removes tool marks and gives a uniform, satin, premium matte cosmetic surface.
Linear brushing for a classic metal look, or chromate/chem-film conversion for electrical conductivity and corrosion protection.
| Parameter | Capability |
|---|---|
| Processes | High-speed CNC milling, turning, 3/4/5-axis machining, pockets, fins, drilling, tapping, thread milling, thin-wall and light-weighting |
| Materials | 6061 T6/T651, 6063, 7075, 5052, 2024, MIC-6/ACP cast plate, 5083/6082, extrusions and die-cast aluminium — certified stock |
| Tolerance | ISO 2768-mK standard; ±0.01 mm on critical features; tight flatness and thin-wall control on lightweight parts |
| Part size | Small connectors and heatsinks up to large plates and housings; large parts on gantry centres |
| Surface finish | Ra 0.8 typical; clear/black/red/blue anodising, hard anodising, sandblasting, brushing, chromate, with masking |
| Documentation | Material certificate EN 10204 3.1, first-article inspection, CMM dimensional report, full traceability |
| Quantity | 1-off prototype · small batch · high-volume serial production; no fixed MOQ |
| Lead time | Prototype 4–9 working days; production depends on quantity, grade and finish |
| Shipping | DHL/FedEx/UPS, air or sea freight; EXW, FOB or DDP to the USA, Germany, France, Italy, Spain, Australia and worldwide |
Lightweight, high-accuracy and cosmetic aluminium components for OEMs across industries.
Housings, bezels, covers, knobs and chassis for consumer electronics, audio and instrumentation with premium anodised finishes.
Robot-arm structures, joints, mounting plates, end-of-arm tooling and lightweight automation components.
Brackets, housings, battery and cooling components for vehicles, EVs, motorsport and lightweight mobility.
High-density heatsinks and liquid cooling plates for power electronics, data centres, LED and laser systems.
High-flatness baseplates, optical and laser housings and motion components requiring stability and precision.
7075 and 2024 structural parts for drones, aerospace and motorsport programmes with anodised or coated protection.
Practical answers from our engineering team. Still unsure? Send your drawing and ask.
Large-format baseplates, fixture plates and cooling plates on gantry centres.
Complex aluminium robot arms and multi-sided aerospace parts.
Housings, brackets and plates in steel, stainless and copper too.
Aluminium sleeves, spacers, connectors and threaded parts.
304/316 precision parts for corrosion-resistant applications.
Bent and welded aluminium panels, cabinets and chassis.
Send your drawings and required anodising colour — our engineering team will reply within 24 hours (Mon–Sat).
