ISO 9001 certified CNC milling shop: 3-axis, 4-axis and multi-axis machining of housings, enclosures, brackets, manifolds, valve blocks, mounting plates and heatsinks in aluminium, steel, stainless steel, brass, copper and engineering plastics. Tolerance down to ±0.01 mm, with anodising, plating and powder coating. DDP shipping to the USA, Germany, France, Italy and across Europe — quote in 24 hours.
From a single machined prototype to repeat production batches, our vertical and horizontal machining centres mill prismatic and cavity-based parts with tight flatness, parallelism and bore tolerances. We choose the most economical machine and work-holding for each geometry, so you are not over-paying for 5-axis when a 3-axis part will do.
The cost-effective choice for flat and prismatic parts — mounting plates, brackets, covers, blocks and simple housings — milled with accurate faces, pockets, holes and threads.
A rotary axis machines parts around the circumference or indexes between faces in one setup, ideal for shafts with flats, manifolds and multi-sided housings.
Deep pockets, bearing bores, sealing surfaces and port patterns on gearboxes, valve blocks and electronic housings, milled square and flat for reliable assembly.
We hold ±0.01 mm on critical dimensions and verify flatness, position and bore size on a CMM, with first-article and final inspection reports available.
We coordinate aluminium anodising, hard anodising, powder coating, nickel/zinc plating and conversion coating, with masking of precision bores and mating faces.
Certified, traceable material, secure packaging and worldwide DHL/FedEx/UPS, air or sea freight. DDP to the EU clears customs and duty for door-to-door delivery.
We stock and source certified metals and engineering plastics with material certificates. Grade selection is part of our free DFM review.
Fast, lightweight and excellent for housings, plates, panels and heatsinks; anodises well and is the most common CNC milling alloy.
Carbon and alloy steels for structural, load-bearing and machine components, with good strength and weldability for general industrial use.
Corrosion-resistant and hardened stainless for medical, food, marine and precision housings that demand cleanability or strength.
Free-machining brass, copper and tellurium copper for connectors, busbars, manifolds, electrodes and conductive components with fine detail.
POM (Delrin), PEEK, PEI, PA nylon, PPS and UHMW for insulating, lightweight, self-lubricating or corrosion-proof parts.
P20, H13, D2 and S7 for moulds, dies, jigs and fixtures that need high hardness and wear resistance, machined pre- or post-heat-treatment.
We machine cast aluminium/iron parts and aluminium extrusions to final geometry, adding precision bores and faces to near-net shapes.
Titanium, bronze, magnesium and customer-supplied materials quoted on request — tell us the grade and we confirm feasibility.
Every component is made-to-print / OEM. A selection of representative milled housings, brackets, plates and functional components.
Need a different material, finish or volume? Send STEP, STP, IGS, DWG or PDF for a quotation within 24 hours.
We coordinate mechanical and chemical finishes to your specification, with masking for precision bores and sealing faces.
Type II clear or coloured anodising and Type III hard anodising for aluminium, adding corrosion and wear resistance in black, blue, red and natural tones.
Durable, even powder coating in RAL colours for equipment panels, enclosures and structural parts, with masking of machined mating faces.
Electroless nickel, zinc and tin plating for corrosion protection and surface hardness on steel, brass and copper components.
Stainless passivation and aluminium chromate/chem-film conversion coating for electrical grounding and corrosion resistance.
Satin, bead-blasted or brushed cosmetic surfaces that hide tool marks and handling on visible housings and front panels.
Black oxide on steel, or standard as-machined finish with defined Ra values, deburring and edge-breaking included.
| Parameter | Capability |
|---|---|
| Processes | 3-axis, 4-axis/indexed and multi-axis milling, pocketing, profiling, drilling, tapping, boring, thread milling, face milling |
| Materials | Aluminium 6061/6063/7075, steel 1045/4140, stainless 304/316/17-4, brass, copper, POM/PEEK/PEI, tool steel — certified stock |
| Tolerance | ISO 2768-mK standard; ±0.01 mm on critical features; tight flatness, parallelism and bore tolerances |
| Work envelope | Small precision components up to large plates and housings; large parts on gantry/vertical centres |
| Surface finish | Ra 0.8 typical; anodised, powder-coated, plated, passivated, bead-blasted, brushed or black-oxided to defined Ra |
| Documentation | Mill test certificate EN 10204 3.1, first-article inspection, CMM dimensional report, material traceability |
| Quantity | 1-off prototype · small batch · high-volume serial production; no fixed MOQ |
| Lead time | Prototype 5–10 working days; production depends on quantity, material and finish |
| Shipping | DHL/FedEx/UPS, air or sea freight; EXW, FOB or DDP to the USA, Germany, France, Italy, Spain, Australia and worldwide |
Prismatic and structural precision components for OEMs and equipment builders across industries.
Mounting plates, brackets, fixture blocks, machine panels and structural components for automated production lines.
EMI/RF housings, shielded enclosures, heatsinks and front panels milled from aluminium with accurate mounting features.
High-flatness optical and laser housings, baseplates and vacuum-compatible components requiring tight stability.
Brackets, manifolds, housings and sensor components for vehicles, test rigs and automation systems.
Busbars, copper conductors, valve blocks and structural parts for power electronics, pumps and process equipment.
Gearbox housings, adapter plates and structural brackets for robots, AGVs and end-of-arm tooling.
Practical answers from our engineering team. Still unsure? Send your drawing and ask.
Simultaneous 5-axis machining of impellers, blisks and complex free-form robotics parts.
High-precision shafts, sleeves, bushings and rotational parts in steel, aluminium and brass.
6061/7075/6063 aluminium parts with anodising, sandblasting and brushing.
304/316 precision turned and milled stainless parts, passivated or polished.
Large-format base, fixture, cooling and structural plates on gantry centres.
Laser-cut, bent, welded and powder-coated enclosures and chassis.
Send your drawings and requirements — our engineering team will reply within 24 hours (Mon–Sat).
