Custom titanium CNC machining in Ti-6Al-4V, Ti-6Al-4V ELI, Grade 2 and Grade 5 — 5-axis milling, CNC turning and Swiss turning of lightweight, corrosion-resistant parts with ±0.01 mm tolerance. Material certificates, CMM inspection and DDP shipping to the USA, Germany, France, Italy and worldwide.
Titanium is the material of choice where strength, weight and corrosion resistance decide the design.
Nearly half the density of steel with comparable strength — the reason aerospace and motorsport components use titanium despite the material cost.
Immune to salt water, chemicals and body fluids — ideal for marine, medical and chemical-process components that must outlast the product.
Ti-6Al-4V ELI and Grade 2 are certified for implantable medical devices and surgical instruments, with full material traceability.
Retains strength at elevated temperature and resists fatigue — critical for turbine, exhaust and structural applications.
Certified bar and billet stock in the grades below, with mill test certificates (EN 10204 3.1) on request.
The industry workhorse — aerospace structural parts, fasteners, racing components, robotics. More CNC parts →
Extra-low interstitial grade for implantable medical devices and high-fracture-toughness applications.
Commercially pure titanium for chemical processing, heat exchangers and surgical instruments.
Softest, most formable grade for deep-drawn and corrosion-critical components.
Weldable grade used for aerospace hydraulic tubing and sporting goods.
Solution-treated and aged condition for maximum strength where stiffness drives the design.
High-strength, formable beta alloys for springs, fasteners and aerospace sheet components.
Special alloys or customer stock machined to print — send the grade and we will confirm machinability.
Titanium work-hardens quickly and burns tools fast — experience matters. Our shop runs dedicated tooling paths and rigid 5-axis setups for consistent titanium parts.
| Parameter | Capability |
|---|---|
| Processes | 5-axis milling, CNC turning, Swiss turning, turn-mill, thread milling, gun drilling |
| Part size | Turning up to Ø400 × 800 mm; milling up to 1300 × 2500 mm (gantry) |
| Tolerance | ±0.01 mm on critical features; ISO 2768-mK standard |
| Surface finish | As machined, bead blasted, polished, electropolished, anodized (Type II/III), passivated |
| Documentation | Mill test certificate EN 10204 3.1, first-article inspection, CMM report, material traceability |
| Quantity | 1-off prototype to high-volume serial production; no fixed MOQ |
| Lead time | Prototype 5–10 working days; serial production by agreement |
| Shipping | DHL/FedEx/UPS, air or sea; EXW, FOB or DDP to the USA, EU and worldwide |
Structural brackets, fittings, bushings, fasteners and engine components machined to tight tolerances with full traceability.
Implantable Ti-6Al-4V ELI devices, surgical instruments, dental implants and orthopedic components.
Connecting rods, rocker arms, brackets and suspension components where every gram counts.
Shafts, fittings, valve components and underwater hardware resistant to salt-water corrosion.
Heat-exchanger parts, pump components and fasteners for aggressive media and elevated temperatures.
Lightweight structural components for drones, robotics and high-end consumer devices.
Practical answers about grades, costs and lead times. Still unsure? Send your drawing and ask.
Grades, costs and design tips for titanium CNC parts.
Every part we make, from prototype to serial production.
3/4/5-axis milling of housings, brackets, manifolds and plates.
Impellers, blisks and complex robotics parts in one setup.
Swiss-type and fixed-head turning of shafts, sleeves and fittings.
Small, long and high-volume precision parts from ≈2 mm.
303/304/316/17-4 parts for food, marine and medical.
Repeatable quality, honest DFM feedback and on-time delivery for custom precision parts.
The DFM feedback caught a tolerance problem before we cut any tooling. First samples were within spec and the lead time was exactly as quoted.
Repeatable anodised aluminium housings from batch to batch, with EN 10204 3.1 certificates included. We now release them straight to the line.
Complex 5-axis parts were quoted in under a day and shipped DDP to our door. Communication was clear at every step.
Send your drawings and requirements — our engineering team will reply within 24 hours (Mon–Sat).
